Is it Possible To Update a Manual Lathe to Meet Modern Standards of Machining?

Improving Manual Lathe Accuracy and Output

EEC: Yes, the accuracy of a manual lathe can be improved by installing current-technology linear encoders and displays. EEC Ltd have vast experience and knowledge in this area of machining improvement.

Often a new digital readout display and linear scale setup, commonly referred to as a DRO and encoder, will require custom brackets and fixings. EEC are well versed in designing and manufacturing these fixings quickly, prior to installation.

Send Email Enquiry (UK only)
2 axis Acu-Rite system fitted to the Hardinge HLV-H lathe.

2 axis Acu-Rite system fitted to the Hardinge HLV-H lathe.

What is the Process For Installing a DRO and Scale setup on a manual lathe, to achieve ultra high accuracy?
EEC: For high accuracy requirements, such as aerospace and scientific machining, a 0.001mm resolution (or similar,) is often required for the scales/encoders, per axis. EEC Ltd are long-standing and experienced distributors for HEIDENHAIN and ACU-RITE, and can procure special order scales to achieve the desired resolution that the customer needs.

ls 600 series heidenhain scale

HEIDENHAIN Linear Scale. EEC Supply Special Order, Ultra High Accuracy Scales For Exacting High Spec Customer Requirements.

Is there a typical setup, or combination of products to improve accuracy on the lathe?
EEC: Both HEIDENHAIN and ACU-RITE have a range of products to fit the purpose. There are standard size and also compact versions of linear scales to fit into limited available space. For standard setups, The ACU-RITE DRO 203 is often partnered with the SENC 150 linear scales/encoders or SENC 50 microscale/encoders.
See recommended products below.

4-Acu-Rite DRO 203 display

Acu-Rite DRO 203 Digital Readout Display (DRO)

Is it possible to replace an ageing readout on my manual lathe?
EEC: Yes. It is possible to replace an old DRO with a current one. Sometimes it is possible to use existing scales/encoders if they are in good working order and have a high enough resolution for the intended application, in most cases adapter cables will be required to enable connection of the new system to old technology.

new dro replacing old dro

Old and New. Replacement DRO.

Can Existing Linear Scales be Refurbished to Work With a New Digital Readout?
EEC: In the case of worn in-accurate and faulty scales , it is sometimes possible to refurbish and recalibrate existing scales if the parts are available or can be manufactured efficiently.

Old LIP 101R scanning head and scale.

Old LIP 101R scanning head and scale. Refurbished.

Recommended Products For Upgrading Your Manual Lathe

The displays below have milling, turning and general DRO software built in as standard.

These software features are selected and demonstrated to the customer when EEC install the system.
Heidenhain ND 7013 display with LS 383C slimline and LS 683C standard size linear scales
Acu-Rite DRO 203/304 displays with SENC 50 microscale and SENC 150 standard size scale

Send Email Enquiry (UK only)