A long-standing customer recently purchased a second-hand milling machine fitted with a hobby-style Easson DRO system. It was purchased from an educational establishment – bought as seen. It wasn’t until the machine was delivered to the customer’s premises that the customer realised that the milling machine had a 2 axis X-Y DRO system installed – […]
EEC Ltd received a call from a new customer – recommended by a third-party service company we had previously completed repairs for. They were experiencing an ‘encoder amplitude low’ alarm on a HEIDENHAIN LB301 scale/encoder. EEC Ltd visited the customer on-site swiftly, to discover the history of the machine and the physical state of the […]
Diagnosis of Fault Codes ‘Error in the safety status of the HSCI transfer’, ‘C030 Alarm with supply voltages CC0’ and ‘C038 Voltage monitoring CC0 voltage’ Engineering Equipment Centre Ltd (EEC Ltd) – Authorised HEIDENHAIN Distributors and Engineers, received a callout from a local company operating a 5 axis YCM MV106A machining centre which was reporting […]
EEC LTD Assist Aerospace Machining Companies to Improve Accuracy, with HEIDENHAIN Technology Helicopter Gearbox Component Re-Manufacturing Improvements, With EEC. EEC Ltd offer services to machining companies whom require world-class output and assistance with their constant strive to improve accuracy and quality. Aerospace machining is usually managed by an AS9100 revision D management system, achievable and […]
The Importance of Backing Up Your Complete HEIDENHAIN TNC Control and Machine Tool Data In our computerised and device-centric world, most of us are aware of hard drive, battery or memory issues when a PC/Laptop fails, and the potential for losing our data if we don’t have backup procedures in place to restore data, once […]
4 DRO Displays – 8 Gauge Installation HEIDENHAIN ND7013 & GC2013 Fitted to a Train Wheel Cutting Lathe EEC visited a customer to update a specialised cutting lathe. We fitted replacement HEIDENHAIN ND7013 & GC2013 systems sporting 4 displays and 8 gauge heads. The HEIDENHAIN multi gauge and multi display setup was installed on a […]
HEIDENHAIN ND7013 DRO Display Fitted To An EMCO lathe EEC Ltd were commissioned to fit a replacement HEIDENHAIN ND7013 Digital Readout (DRO) display to an EMCO lathe, replacing a defective factory-fitted option which the customer was having major issues with. Using genuine signal and cable adapters the HEIDENHAIN ND7013 DRO is a plug and play […]
EEC Ltd are specialists in DRO supply, installation & configuration. But we don’t just install and maintain equipment, we have expertise in making the best use of the equipment that we install. In Depth HEIDENHAIN and ACU-RITE Training and guidance is available – on-site. Accompanying the supply and installation of a new DRO (digital read-out) […]
During 2024, both engineers from EEC Ltd – Gary and Kris were invited by HEIDENHAIN GB to participate in their Partner Service training program. The in depth training from HEIDENHAIN GB is designed to enhance the level of services that EEC Ltd are able to offer to our customers. Completion of the Partner Service training […]
EEC Ltd are engineer’s specialist in Digital Readout (DRO) displays and linear/rotary scale installs, amongst other operational machining maintenance and improvement work. We are appointed UK agents for HEIDENHAIN DRO and ACU-RITE DRO and machine tool equipment. This page discusses integrating these current machine tool technologies into older, legacy & obsolete machining setups Saving Money […]