Skip to the content Skip to the Navigation

EEC Ltd - Authorised Heidenhain UK Distributor & Supplier of Acu-Rite Readout Systems

  • Home
  • Contact
  • Products
    • HEIDENHAIN/ACU-RITE Products Overview
    • SPECIAL OFFER! Workpiece and Tool Probing for HEIDENHAIN TNC
    • Angle Measurement
      • HEIDENHAIN Rotary Encoders
      • HEIDENHAIN Angle Encoders
    • HEIDENHAIN Length Measurement
      • HEIDENHAIN Sealed Linear Encoders
    • HEIDENHAIN Digital Readout Displays (DRO)
    • Machine Datum Setup, Workpiece Measurement & Tool Probing
    • HEIDENHAIN TNC Controls
      • HEIDENHAIN TNC 640
      • HEIDENHAIN MANUAL plus 620
      • HEIDENHAIN CNC PILOT 640
      • HEIDENHAIN Drives, Motors and Inverters
    • HEIDENHAIN Interface Electronics
    • HEIDENHAIN Encoder Analysis/Diagnostics
      • HEIDENHAIN PWT 100 Testing
      • HEIDENHAIN PWM 21 ATS
    • HEIDENHAIN Handwheels
    • ACU-Rite DRO (Digital Readouts)
  • DRO Repairs
    • HEIDENHAIN DRO Repairs
    • ACU-RITE DRO Repairs
    • Fagor DRO Repairs
    • Anilam DRO Repairs
    • Mitutoyo DRO Repairs
    • Newall DRO Repairs
    • Sony Magnescale DRO Repairs
  • Service
  • Heidenhain Product Catalogue
  • News
  • EEC Ltd
    • About EEC Ltd
    • Privacy Policy

gary

  1. HOME
  2. gary
21st June 2022 / Last updated : 21st June 2022 gary Heidenhain DRO 688C

Heidenhain DRO LS388C/688C Scales Refurbishment

EEC visited a customer to carry out a refurbishment on Heidenhain DRO LS388C and 688C scales. EEC tested, stripped, and replaced the lip seals and finally, thoroughly cleaned the equipment. No major parts were required. Heidenhain supply high-quality products that keep on going. This Heidenhain DRO and Scales combo will last another 10 years. Low […]

linear scale repairs
30th May 2022 / Last updated : 30th May 2022 gary Linear Scale Repairs

ACU-RITE SENC 150 Linear Scale Repairs

Linear Scale Repairs on a XYZ Pro 3000 Semi CNC Turret Mill Showcasing one of our recent on-site repairs to CNC Machinery – in this case an Acu-Rite linear scale. The customer recently moved the host machine into a new position and tore the cable out of the Z-axis Acu-Rite SENC 150 scale. EEC Ltd […]

HEIDENHAIN Terminal board
22nd April 2022 / Last updated : 22nd April 2022 gary Linear Scale Repairs

Linear Scale Repairs from EEC Ltd

EEC Ltd Supply Linear Scale Repairs throughout the UK. Here is a selection of this type of work.

acurite dro splash screen on power up
28th February 2022 / Last updated : 28th February 2022 gary 3 Axis DRO Installation

Obsolete & Faulty Anilam DRO Digital-Readout-Display Replacement

One of our latest visits to a customer. A faulty & obsolete Anilam DRO – digital readout display. EEC worked on-site and replaced the faulty unit with a new Acu-Rite DRO 203 display, still using the original linear scales. Compatibility is key. ACU-RITE DRO 203 Digital Readout UK Versatile digital readout for up to three […]

J & s 540 surface grinder and dro
31st January 2022 / Last updated : 31st January 2022 gary DRO Calibration

Heidenhain DRO ND 760 Repair

HEIDENHAIN ND 760 Installed on Jones & Shipment 540 Surface Grinder We recently carried out repair and refurbishment work on an old Heidenhain DRO ND 760, a 20+ year-old Heidenhain digital readout system installed on a Jones & Shipmen 540 Surface Grinder (first manufactured in World War two, 1941). This original Heidenhain DRO equipment was […]

New Heidenhain motor Power cable
22nd December 2021 / Last updated : 22nd December 2021 gary Replacement Heidenhain Cables

HEIDENHAIN & Seimens Replacement Cables – CNC/TNC Repairs

Sometimes CNC/TNC and DRO parts and components just wear out and need to be replaced. Cables are a common component for replacement as they are often subjected to movement during the operation of CNC machinery, which can cause wear and ultimately, failure over time. In this example, EEC replaced an X-axis Siemens Motor Power cable […]

X axis cable harness
7th December 2021 / Last updated : 7th December 2021 gary Acu-Rite Scales

Aerospace CNC Machining – Rapid Response Diagnoses & Repair Service

EEC Ltd supply rapid response TNC, CNC & DRO error/fault diagnoses & repair, to critical aerospace CNC machining operations throughout the south of England. Operating within highly regulated markets, aerospace CNC machining companies operate manufacturing services to ultra-high quality control & often to ‘just-in-time’ supply agreements with their customers. This dictates that, in the case […]

Kearns-Richards Horizontal Borer
26th October 2021 / Last updated : 26th October 2021 gary Acu-Rite Scales

Hampshire CNC Repairs – Acu-Rite SENC 150 2.5 Meter Scale

EEC Ltd repair CNC, TNC and DRO machinery throughout Southern UK and install Acu-Rite CNC/TNC/DRO replacements and upgrades, to specification. In the event that a faulty product, component or part is obsolete or unavailable, EEC can replace the complete product with an Acu-Rite equivalent. In this case, EEC replaced a faulty Anilam scale with an […]

dro calibration
25th August 2021 / Last updated : 25th August 2021 gary DRO Calibration

Annual DRO Calibration and FAGOR DRO Fault Diagnoses and Repair

DRO Maintenance and Calibration EEC Ltd were recently contacted by a longstanding customer in Hampshire, to preform their annual DRO check over and calibration. The DRO maintenance and calibration was successfully carried out on 7 manual Turret Mills. Fagor DRO Fault Diagnoses and Repair Whilst EEC were attending the site, issues were diagnoses on 2 […]

Encoder error message - C310 Z1 track Y error Heidenhain ERN 1387 error
12th August 2021 / Last updated : 12th August 2021 gary HEIDENHAIN error codes

HEIDENHAIN Fault Finding & Error Diagnoses at EEC Ltd – Authorised UK HEIDENHAIN Distributors

EEC Ltd carry out fault finding and error diagnoses on DRO, TNC and CNC devices. We initiate a visit by arming ourselves with information about the device and wiring requirement. Here are a few examples of HEIDENHAIN faulting finding and error diagnoses.

Posts navigation

  • Page 1
  • Page 2
  • Page 3
  • »

HEIDENHAIN Products & Digital Readout Systems

  • HEIDENHAIN UK Repair Centre
  • HEIDENHAIN DRO Repairs
  • SPECIAL OFFER! Workpiece and Tool Probing for HEIDENHAIN TNC
  • Angle Measurement
    • HEIDENHAIN Rotary Encoders
    • HEIDENHAIN Angle Encoders
  • Length Measurement
    • HEIDENHAIN Sealed Linear Encoders (Sealed Linear Scales), Supply, Installation & Service
  • Machine Datum Setup, Workpiece Measurement & Tool Probing
  • HEIDENHAIN Digital Readout Displays (HEIDENHAIN DRO) – UK Dealer
  • HEIDENHAIN TNC Controls for Milling Machines & Machining Centres
    • HEIDENHAIN TNC 640 – The Contouring Control for Milling and Milling/Turning Machines
    • HEIDENHAIN MANUAL plus 620 – The Contouring Control for CNC and Cycle Lathes
    • HEIDENHAIN CNC PILOT 640 – The Contouring Control for CNC Lathes
    • HEIDENHAIN Drives: TNC Drives, CNC Drives, Motors and Inverters
  • HEIDENHAIN Interface Electronics, UK Supply, Installation & Service
  • HEIDENHAIN Encoders – Analysis of Encoder Functions & Machine Diagnostics
    • HEIDENHAIN PWT 100 – Testing Device for HEIDENHAIN Encoders – UK
    • HEIDENHAIN PWM 21 ATS Software – Diagnostics and Adjustment of HEIDENHAIN Encoders
  • HEIDENHAIN Handwheels, from EEC Ltd – Authorised UK Distributor
  • Acu-Rite DRO (Digital Readout) Systems, UK.

Recent Posts

Heidenhain DRO LS388C/688C Scales Refurbishment

21st June 2022
linear scale repairs

ACU-RITE SENC 150 Linear Scale Repairs

30th May 2022
HEIDENHAIN Terminal board

Linear Scale Repairs from EEC Ltd

22nd April 2022
acurite dro splash screen on power up

Obsolete & Faulty Anilam DRO Digital-Readout-Display Replacement

28th February 2022
J & s 540 surface grinder and dro

Heidenhain DRO ND 760 Repair

31st January 2022
New Heidenhain motor Power cable

HEIDENHAIN & Seimens Replacement Cables – CNC/TNC Repairs

22nd December 2021
X axis cable harness

Aerospace CNC Machining – Rapid Response Diagnoses & Repair Service

7th December 2021
Kearns-Richards Horizontal Borer

Hampshire CNC Repairs – Acu-Rite SENC 150 2.5 Meter Scale

26th October 2021
dro calibration

Annual DRO Calibration and FAGOR DRO Fault Diagnoses and Repair

25th August 2021
Encoder error message - C310 Z1 track Y error Heidenhain ERN 1387 error

HEIDENHAIN Fault Finding & Error Diagnoses at EEC Ltd – Authorised UK HEIDENHAIN Distributors

12th August 2021

Category

  • 3 Axis DRO Installation
    • Acu-Rite 3 D200
    • Acu-Rite DRO 200S/300S
    • ACU-RITE DRO 203
    • ACU-RITE DRO 300
    • Acu-Rite Mill/Lathe vision
    • Acu-Rite Millpwr 2
    • Acu-Rite VUE
    • acurite dro units
  • Acu-Rite Scales
    • Acu-Rite SENC 150 Scale
      • Linear Scale Repairs
  • aerospace cnc tnc dro repairs
  • anilam dro repair & replacement
  • CNC Repairs
    • CNC Repair & Supply Bournemouth Poole Dorset
  • DRO Calibration
  • DRO for bridgeport Mill
  • dro machining repairs
  • DRO Maintenance
  • DRO Repairs
    • DRO Repair & Supply Bournemouth Poole Dorset
    • DRO Repairs in Southampton
  • Gosport CNC TNC DRO Repairs & Installation
  • HEIDENHAIN Control
    • Heidenhain i530 control
  • Heidenhain DRO 688C
  • Heidenhain DRO LS388C
  • HEIDENHAIN Fault Finding
    • HEIDENHAIN error codes
  • Heidenhain Refurbishment
  • Linear Scale Repairs
  • Newall DRO/TNC/CNC Repairs
  • rapid response cnc repairs
  • Replacement Heidenhain Cables
  • South London DRO Repairs & Installation
  • TNC Repairs
    • TNC Repair & Supply Bournemouth Poole Dorset
  • TNC/CNC & DRO Repairs Farnborough
  • Uncategorised
  • vertical lathe DRO
  • X Axis Scale Fault Repair

Archive

  • June 2022
  • May 2022
  • April 2022
  • February 2022
  • January 2022
  • December 2021
  • October 2021
  • August 2021
  • July 2021
  • June 2021
  • May 2021
  • April 2021
  • March 2021
  • February 2021
  • January 2021
  • December 2020
  • November 2020
  • October 2020
  • September 2020
  • August 2020
  • June 2020
  • April 2020
  • January 2020
  • Home
  • Contact
  • Products
  • DRO Repairs
  • Service
  • Heidenhain Product Catalogue
  • News
  • EEC Ltd

Copyright © EEC Ltd - Authorised Heidenhain UK Distributor & Supplier of Acu-Rite Readout Systems All Rights Reserved.

Powered by WordPress & Lightning Theme by Vektor,Inc. technology.

MENU
  • Home
  • Contact
  • Products
    • HEIDENHAIN/ACU-RITE Products Overview
    • SPECIAL OFFER! Workpiece and Tool Probing for HEIDENHAIN TNC
    • Angle Measurement
      • HEIDENHAIN Rotary Encoders
      • HEIDENHAIN Angle Encoders
    • HEIDENHAIN Length Measurement
      • HEIDENHAIN Sealed Linear Encoders
    • HEIDENHAIN Digital Readout Displays (DRO)
    • Machine Datum Setup, Workpiece Measurement & Tool Probing
    • HEIDENHAIN TNC Controls
      • HEIDENHAIN TNC 640
      • HEIDENHAIN MANUAL plus 620
      • HEIDENHAIN CNC PILOT 640
      • HEIDENHAIN Drives, Motors and Inverters
    • HEIDENHAIN Interface Electronics
    • HEIDENHAIN Encoder Analysis/Diagnostics
      • HEIDENHAIN PWT 100 Testing
      • HEIDENHAIN PWM 21 ATS
    • HEIDENHAIN Handwheels
    • ACU-Rite DRO (Digital Readouts)
  • DRO Repairs
    • HEIDENHAIN DRO Repairs
    • ACU-RITE DRO Repairs
    • Fagor DRO Repairs
    • Anilam DRO Repairs
    • Mitutoyo DRO Repairs
    • Newall DRO Repairs
    • Sony Magnescale DRO Repairs
  • Service
  • Heidenhain Product Catalogue
  • News
  • EEC Ltd
    • About EEC Ltd
    • Privacy Policy

Call Now