Certified Approved Heidenhain Distributor
EEC are Heidenhain approved distributors, with 35 years experience in DRO/TNC/CNC fault finding, repairing and supplying new replacements with current and genuine calibrated Heidenhain test equipment. Specialising in incremental and absolute Heidenhain Linear scales and Rotary encoders.
Please view some of our latest work.
Obsolete & Faulty Anilam DRO Digital-Readout-Display Replacement
One of our latest visits to a customer. A faulty & obsolete Anilam DRO – digital readout display. EEC worked on-site and replaced the faulty unit with a new Acu-Rite…
Heidenhain DRO ND 760 Repair
HEIDENHAIN ND 760 Installed on Jones & Shipment 540 Surface Grinder We recently carried out repair and refurbishment work on an old Heidenhain DRO ND 760, a 20+ year-old Heidenhain…
HEIDENHAIN & Seimens Replacement Cables – CNC/TNC Repairs
Sometimes CNC/TNC and DRO parts and components just wear out and need to be replaced. Cables are a common component for replacement as they are often subjected to movement during…
Aerospace CNC Machining – Rapid Response Diagnoses & Repair Service
EEC Ltd supply rapid response TNC, CNC & DRO error/fault diagnoses & repair, to critical aerospace CNC machining operations throughout the south of England. Operating within highly regulated markets, aerospace…
Hampshire CNC Repairs – Acu-Rite SENC 150 2.5 Meter Scale
EEC Ltd repair CNC, TNC and DRO machinery throughout Southern UK and install Acu-Rite CNC/TNC/DRO replacements and upgrades, to specification. In the event that a faulty product, component or part…
Annual DRO Calibration and FAGOR DRO Fault Diagnoses and Repair
DRO Maintenance and Calibration EEC Ltd were recently contacted by a longstanding customer in Hampshire, to preform their annual DRO check over and calibration. The DRO maintenance and calibration was…
HEIDENHAIN Fault Finding & Error Diagnoses at EEC Ltd – Authorised UK HEIDENHAIN Distributors
EEC Ltd carry out fault finding and error diagnoses on DRO, TNC and CNC devices. We initiate a visit by arming ourselves with information about the device and wiring requirement….
Acu-Rite DRO 304 4 Axis DRO Installed onto New Vertical Lathe
EEC Ltd – 4 axis DRO installation in Hampshire EEC installed an Acu-Rite DRO 304 digital readout, into a new vertical lathe, in Hampshire. The lathe has now arrived at…
Heidenhain i530 Control – Diagnoses of Error Mikron 5 Axis CNC
EEC Ltd had an enquiry from a machining company to diagnose and fix Linear scale faults. We located the errors to X and Z axis linear scale faults on a…
Newall Repairs – Engineering Equipment Centre
EEC Ltd carry out Newall repairs & maintenance for Newall Measurement systems EEC supply on-site and off-site repair services for Newall DRO Systems, Newall Spherosyn & Microsyn Linear Encoders and…